BLOG
|
Where I post about my road trips, photo shoots, inspirations and tips. |
I needed a back drop stand in order to photo larger items. The professional ones are out of my budget at this time so I did a bit of research about DIY options. I settled on a PVC pipe option which will be easy to put together and store away in a small bag. I purchased 3/4" PVC pipe at a local home renovation store. The fittings are slip type with no threads and are also 3/4". Cutting: I cut the 10 foot lengths into manageable pieces at the store to get them into the vehicle to bring home. Once home, I used my trusty hacksaw to make the additional cuts I needed. In the end I cut the top 3 foot pieces into one - 1 foot length and one 2 foot length because it was too tall for me to put my backdrop onto with my arms outstretched. Cleaning: The PVC pipe has all kinds of black text on it to identify it. I did not want that in my final stand so I checked the web and found out that acetone and steel wool were the answer. I bought a small bottle of nail polish remover and I already had fine steel wool. It takes a lot of muscle power to get them off but with persistence it works really well. I then used an abrasive cleaner to remove any other dirt and grime off the pipe to make it a nice white color. I removed the labels from the fittings and used adhesive remover as needed. They look great. It took 2 hours to do the 10 feet and fittings. Assembly: Top Bar: Put the elbows at each end of the 4 foot top bar. Feet: Put two 1 foot lengths in each of the bottom holes of the tee fittings. Put end caps on the ends. Repeat for the other foot. Side Poles: Place a 3 foot length at the bottom, put a coupling on top end then place another length of pipe to make it taller. Repeat for the other side. Final: Place side poles in the top hole of the feet. Place feet of side poles at parallel to each other. Then place the ends of the top bar down onto the side poles one at a time.
Store the backdrop:
I needed a bag to hold all the pieces to ensure I did not lose them or break them. I made a bag from some second hand faded fabric which was not good for other projects. The piece I had was narrow and very long. I placed the fold at the bottom where most of the stress will be. I sewed the 2 side seams and turned it good side out. I created a casing at the top by folding down the edge and sewing. I ran 2 lengths of cotton twill ribbon one from each slit in the side seam. It closes easily but pulling on each ribbon. It was ready for my photography trip to Drumheller.
0 Comments
|
Archives
October 2021
Categories
All
|